The Mad4One 6-Pin Cranks

This is all what you need.

Now, let's mount Pins and Spacer.

Next step: we mount the hub screw. Only 2 turns.

Move the Pins forwards to touch the spacer.

Just as described in the picture. The Pins should touch the spacer.

.... in this way we touch the spacer with all Pins.....

Guide the pins all in the same direction towards the spacer.

Now tighten the hub screw up to 20Nm.
ATTENTION: if you over tighten the hub screw you may damage the cranks irreparably.

IMPORTANT

  • pedals, that have not been tightened enough, can irreparably damage the cranks.
  • before each ride, check that pedals and cranks have been tightened correctly.