How to fit the Mad4One Slim or Comfort Saddle with composite (carbon and Kevlar) base to the seatpost.
You receive the saddle with 4 long and 4 short screws.
The short screws are the ones you will use to fit the saddle to the seatpost.
If you have difficulty in fixing, though, the long screws will help you find the right angle of tightening.
Do not force the screw during the entire screwing phase, this way you avoid stripping the thread of the screw.
Fit the saddle by fastening the 4 long screws, one after the other.
With the palm of your hand you can feel the screws under the foam.
Now replace the long screws with the short ones, one after the other.
To find the right tightening angle make pressure on the screw by turning anticlockwise.
When the screw is in the right direction you hear a small click - start turning clockwise after the click.
The screws should be tightened to the end without force. Then remember to keep them always tight.